Showing results: 151 - 165 of 232 items found.
-
WS-1 -
Lisun Electronics Inc.
Applied to test electrical accessories heating conditions when connected to load current, whether the temperature rise of electrode is compliance with standard requirement or not. And it can effectively detect whether the plug bush is slants thin and whether plug and socket cooperated with all right. It is designed and manufactured according to IEC884－1, GB2099.1-2008 and other relevant standard of electrical accessories.
-
SW00IECK -
Keysight Technologies
The IEEE 802.3 CK Tx License Suite is part of the subscription based Oscilloscope Compliance Test Software Suites. This suite covers Tx Validation license for IEEE 802.3 CK (100/200/400 Gb/s). Together with the subscription model, this enables the support and coverage continuity as the IEEE 802.3 CK technology specification progresses through revisions.
-
SW00PCIE -
Keysight Technologies
The PCI Express Validation License Suite is part of the subscription based Oscilloscope Compliance Test Software Suites. This suite covers Tx Validation licenses for PCI Express with coverage across the PCI Express technology starting from Gen4. Together with the subscription model, this enables the support and coverage continuity as the PCI Express technology progresses through generations.
-
Sentinel -
Seaward Electronic Ltd
The Sentinel series of test instruments has been built to provide a cost effective, yet powerful solution to hipot testing, whether on a production line or in a laboratory environment for compliance testing purposes. With the ability to perform either 5kV AC or 6kV DC dielectric strength tests and up to 500VA AC power output the Sentinel series can aid testing to many international safety standards including IEC, EN, UL and CSA to name but a few.
-
CV30P650 -
Frothingham Electronics Corporation
The CV30 P650 test station is currently the highest voltage pulser in a series of exponential pulse generators that can be connected to our FEC200E tester. This gives you all the versatility of the proven FEC200 with the addition of high power exponential pulses. The CV30 P650 pulse adapter can produce a maximum current of 100A at up to 600V using exponential pulses up the 10/1000 waveform. The pulser is rated at 30KW from 300V to 650V. Voltage compliance at 100A is 600V. The station can also include all of the usual FEC200 tests in the same test program.
-
Keystone Compliance
Keystone Compliance offers temperature testing and temperature & humidity testing in chambers ranging from small bench top to large drive-in systems. Our largest chamber has inside dimensions of 12’ wide x 15’ long x 10’ tall and an 8’ x 9’ door. However, we have created custom oversized temperature chambers to accommodate much larger devices including cars, drones and large pieces of machinery. If you have a large unit, we can likely find a way to test it. Keystone Compliance is capable of moving, installing, and testing multiple rack assemblies. Our other large walk in temperature test chamber is equipped with twin 30 hp compressors and is capable of temperature transition rates exceeding 15 degrees Celsius per minute. This chamber permits temperature cycling testing on large items with aggressive transition times.
-
PCTEL, Inc
With PCTEL’s automated testing solution, you can ensure in-building communications coverage while saving time and money. Test multiple public safety, cellular, and private networks simultaneously using grid or path-based methods. Commission Business Critical and Emergency Responder Communication Enhancement Systems (ERCES). And auto-generate submittable reports for compliance with FCC and local code requirements.
-
Shenzhen Noyafa Electronic CO.,LTD
*Detect AC Power range : 50-1000V.*Test live wire and with flash indicate.*Locate wire break point easily.*LED assist using in dark place.*Certification. Passes RoHS, FCC, and CE compliance testing, and Noyafa is certified to the ISO 9001 standard.*100% Affordable. Manufactured in China and a lot cheaper than competitor products with similar quality.
-
19055 -
Chroma Systems Solutions, Inc.
Hipot or dielectric withstand testing instruments manufactured by Chroma are used for conducting electrical safety tests on electrical components and products to make certain they are in compliance with IEC, UL, TUV, CSA, EN and other electrical safety requirements. In addition, these instruments are designed for general product or component testing as well as complex medical safety testing (60601-1) ensuring human safety and product reliability.
-
Rhein Tech Laboratories, Inc.
Rhein Tech Laboratories, Inc. (RTL) is a full-service design and compliance engineering test laboratory. We have grown with the industry from general purpose EMC testing into other areas of testing such as Radio (RF testing), Military and Aviation, Industrial, Scientific and Medical, Automotive, Electrical Safety, Shielding Effectiveness, Site Surveys and Radar Cross Section & High Range Resolution measurements.
-
REA VeriCube -
REA Elektronik GmbH
The REA VeriCube is a state-of-the-art matrix and barcode verification device which can be used across all industry sectors. Whether lying, standing or from top to bottom, virtually any test sample can be measured contact-free in the optimum measuring position. The measurement of optical codes in compliance with defined angles, distances and lighting allows accurate and reproducible measurement results and quality evaluations.
-
MFI -
Hanatek Instruments
The Hanatek Melt Flow Indexer (MFI) is one of the most advanced instruments available for the measurement the melt characteristics of thermoplastic polymers.Understanding melt flow is a key indicator for producers, processors and converters of plastic materials as it dictates the temperatures and pressures required to manufacture consistent quality productsActual barrel temperature can be measured to ensure that every test is performed with complete compliance to ASTM D1238 (2011) Part A, B or C and ISO 1133 (2011) with full test documentation.Test TypesMFI/MFRMelt Volume RateMelt DensityShear Stress/RateMelt Viscosity
-
MFI -
Rhopoint Instruments
The Hanatek Melt Flow Indexer (MFI) is one of the most advanced instruments available for the measurement the melt characteristics of thermoplastic polymers.Understanding melt flow is a key indicator for producers, processors and converters of plastic materials as it dictates the temperatures and pressures required to manufacture consistent quality productsActual barrel temperature can be measured to ensure that every test is performed with complete compliance to ASTM D1238 (2011) Part A, B or C and ISO 1133 (2011) with full test documentation.Test TypesMFI/MFRMelt Volume RateMelt DensityShear Stress/RateMelt Viscosity
-
Verticon® 100 BGA -
Johnstech International Corporation
The Verticon® 100 BGA socket /contactor is an elastomer based contactor technology featuring a combined contact profile, and proprietary plating, and solid contact dynamics providing low inductance and stable contact resistance under multiple (production) landing test conditions. The overall design architecture of the Verticon® 100 contactor enables functional test hardware interface compliance as required by precision analog/mixed signal, high speed digital and RF SOCs’ up to the millimeter wave frequency domain.
-
Cole-Parmer Instrument
We offer a broad range of test and measurement devices for your scientific, educational, industrial, and process applications. We carry the test and measurements tools you need to analyze, validate, and verify measurements in your electronic and mechanical systems, ensuring compliance to quality assurance and quality control programs. Our selection features portable and bench oscilloscopes, multimeters (DMMs), clamp meters, megohmmeters, stroboscopes and tachometers, power transformers, along with precision meters for humidity, moisture, light, airflow, weather, and vibration.
